Products & services

The Safran Cabin air system opening / closing V2T152D valve regulates cooling of the avionic bay. A rotating actuator ensures the closing and the opening of the butterfly valve.

This valve VP0615E00, produced by Safran Cabin, regulates air conditioning supply in the air system.

The sand scavenger blower, produced by Safran Cabin, is installed on the helicopter to extract air first filtered in scavenger cyclone filters.

The universal brake cooling fan AE/RU/DR1502 increases air flow in order to cool down
the aircraft's carbon brakes between two flights and thus increasing the utilization rate of
the aircraft. This product can be adapted to the entire AIRBUS A320 and A330 family.

The universal brake cooling fan FU/DR/RU1802 increases air flow in order to cool down
the aircraft's carbon brakes between two flights and thus increasing the utilization rate of
the aircraft. This product can be adapted to the entire AIRBUS A350 family.

The check valve CT141-1 is in the blower circuit for electronic equipment in the aircraft bay. Produced by Safran Cabin, it is comprised of a housing with 2 mobile flaps and a spring.

The Safran Cabin RC0200A00 heater is installed in the cockpit's air distribution system
and heats air through outlets in the side of the cockpit.

The condenser fan AE2507A03, produced by Safran Cabin, cools the calorific fluid in the
helicopter air conditioning system by blowing air through a thermal exchanger.

Produced by Safran Cabin, the fan AE1112G01 is integrated in the air management systems and ensures the ventilation of the cockpit, cabin and galleys of aircraft or helicopters.

The avionics fan AE1819B00, produced by Safran Cabin, ensures the cooling of the
principal avionics bay of the aircraft.

The electric fan AE0707A01, produced by Safran Cabin, cools the airplane cockpit for all ground and flight operations.

The avionics fan ECT3454HM00 ensures cooling of the principal avionics bay of the
aircraft. Produced by Safran Cabin, it is equipped with a health monitoring system to
detect bearing failure.

The fan AE1515B01, produced by Safran Cabin, placed under the cabin, extracts outside pre-filtered air and uses it to cool the avionic bays of the helicopter.

The oil / air cooler HA2530B01, produced by Safran Cabin, acts to cool down the
lubricating oil in the helicopter's primary transmission box.

The oil-cooling fan produced by Safran Cabin supplies air to cool down the Main Gear Box.

The oil-cooling fan CM2325A02, produced by Safran Cabin,
supplies air to cool down the Main Gear Box of the helicopter.

The bleed air valve VP0601A03, produced by Safran Cabin, ensures the transmission of air from the engines to the air conditioning systems.

The turbofan AT2011A00 is driven by high pressure air from the engines. Produced by Safran Cabin, it ensures ventilation of the aircraft bay while on the ground.

This electric fan AE1107D01, produced by Safran Cabin, adapts to several functions on aircraft and helicopters: avionics cooling, and cockpit, cabin and galley ventilation.

The fan covers several functions in the aircraft: cooling avionics, cabin air conditioning and ventilation of galleys.

The electric fan AE0809A02, produced by Safran Cabin, cools the electronics bay for all ground and flight plane operations.

The VFT300B00 skin air valve, located on the exterior of the aircraft, extracts air from the avionics bay and expels it outside. The valve operates in three different positions; open on ground, partially open and completely closed during flight.

This fan AS1308A02, produced by Safran Cabin, is 115 VAC, 360 to 800 Hz, three
phase, variable speed and with axial flow. It is used to extract air from the compartment at
the rear of the aircraft.

The variable frequency fan AE1812A00, produced by Safran Cabin, ventilates avionics and the aircraft cabin.

Produced by Safran Cabin, the fan AE1109A01 is 115 VAC, 360 to 800 Hz, three phase, variable speed and with axial flow. It is used in the aircraft’s air management system.

This fan AE1513A00, produced by Safran Cabin is 115 VAC, 360 to 800 Hz, three phase, variable speed and with axial flow used in the aircraft’s air management system.

The recirculation fan AS1720D00 is a three-phase fan with variable frequency and highly configurable. It covers air conditioning of the cabin, cockpit, galley and holds cooling air in the avionics bay of the aircraft.

The recirculation fan AS1816A03 is a three-phase fan with variable frequency and highly
configurable. The fan covers air conditioning of the cabin, cockpit, galley and holds
cooling air in the avionics bay of the aircraft.

The blowing fan AS1917A03, produced by Safran Cabin, is a three phase 230 VAC, 360
to 800 Hz variable speed fan that blows air in the avionics bay of the aircraft.

The recirculation fan AS2123B03 is a three-phase fan with variable frequency and is
highly configurable. It covers air conditioning of the cabin, cockpit, galley and holds
cooling air in the avionics bay of the aircraft.

The Safran Cabin SP0731A00 water separator is a mechanical component capable of drying out the air flow passing through it.