Avertissement Ce site n'est pas recommandé pour les navigateurs Internet Explorer. Veuillez utiliser un autre navigateur Web pour profiter d'une meilleure expérience.

Repair Process Engineer

Publié
Ingénierie Industrielle Van Nuys , California , États-Unis CDI Temps complet BAC+3, BAC+4 Supérieure à 3 ans
Publié

Parlons de votre future mission

The Repair Process Engineer is responsible for new repair capabilities technical development. Responsible for calibration program. Responsible for the review and maintenance of technical documentation through the shop. Leads the preparation of repair capabilities for Entry Into Service of new programs / products. Develops specific tools & test benches. Leads continuous improvement efforts.

DUTIES AND RESPONSIBILITIES

• New repair capabilities technical development – Duplication or entry into service
• Manages internal and external calibration by scheduling and performing necessary calibration of tools and gauges
• Review the technical documents (CMM, SB, SiL, FP) for new repair capabilities, entry into service of a new program, transfer of an OEM repair station to ZS network, regular updates
• Define and list specific tools, test benches and general facility installations to implement in the repair station (approved by CapEx). Follow up on the purchase of test and repair equipment and install them in the workshop. Record, approve and justify equivalences as required for new equipment.
• Design new specific tools and test benches if necessary, and coordinate with the OEM for review of design and approval of equivalency.
• Design and write internal repair instructions and coordinate with the OEM for approval. Focus on composite repairs: be an integral part of the inspection process, prepare disposition of the parts, review available repair documentation and prepare and approve additional technical documentation as required.
• Manage the training for technicians in coordination with the OEM
• Development of specific tools & test benches
• Continuous improvement (ergonomics, new specific tools…)
• Processes harmonization
• Prepare and release mechanical and/or electrical drawings to design new specific tools and/or test benches and/or fixtures in accordance with the OEM specifications to improve ergonomics and/or to reduce the time spent on some specific repair process

Et en complément ?

Candidates for positions with SAU must be legally authorized to work in the United States. Employment eligibility verification will be required at the time of hire. Visa sponsorship is not available for this position. This description has been designed to indicate the general nature & level of work performed by an employee within this position. The actual duties, responsibilities & qualifications may vary based on assignment or group. All qualified applicants will receive consideration for employment without regard to race, color, age, ethnicity, religion, sex, sexual orientation, gender identify, national origin, disability, veteran status, genetic data or other legally protected status. SAU is committed to working with & providing reasonable accommodation to individuals with physical & mental disabilities. To verify the information in the job listing or if you need special assistance or an accommodation while seeking employment, please e-mail [email protected] We will make a determination on your request for reasonable accommodation on a case-by-case basis. SAU is an Equal Opportunity Employer Veterans/Disabled | Drug Free Workplace.

Parlons de vous

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

a) Education
• Engineering degree (Bachelor of Science and above) from renowned University or College. Major in Manufacturing or Quality or Mechanical Engineering

b) Experience
• Three to five years of experience in MRO environment or test bench design or process improvement
• Experience with Oxygen systems, or pneumatic systems in a plus

c) Knowledge and Technical skills
• Ability to read, analyze, and interpret technical data (blue prints, drawings, bill of materials)
• Ability to design simple mechanical fixtures or specific tools for composite repairs or for the repair / disassembly / assembly of mechanical parts. Ability to produce corresponding drawings on computer-aided software for manufacturing.
• Ability to formalize repair and work processes, and write procedures for publication that conform to prescribed style and format.
• Ability to apply principles of logical or scientific thinking to a wide range of intellectual and practical problems.

d) Communication Skills
• Ability to read, analyze, and interpret technical data (blue prints, drawings, bill of materials)
• Ability to respond to common inquiries or complaints from customers, regulatory agencies, or members of the business community.
• Ability to formalize repair and work processes, and write procedures for publication that conform to prescribed style and format.
• Ability to effectively report present information to management, public groups, and/or top management.

e) Physical Demands
• The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
• Incumbent in this position must occasionally squat, crawl, climb, crouch, kneel, balance and push/pull and may be required to reach above shoulder level, must frequently bend/stoop. Must be able to occasionally lift up to 50 lbs
• Average visual acuity is required; must be able to use video display terminal, and color acuity is required. This job requires better than average manual dexterity; while performing the duties of this job, the employee is frequently required to sit; use hands to finger, handle, or feel; and talk or hear. Must be able to operate moving devises/tools and operate vehicles.
• Ability to travel as required – domestically and internationally.

logo safran

Safran est un groupe international de haute technologie opérant dans les domaines de l'aéronautique (propulsion, équipements et intérieurs), de l'espace et de la défense. Sa mission : contribuer durablement à un monde plus sûr, où le transport aérien devient toujours plus respectueux de l'environnement, plus confortable et plus accessible. Implanté sur tous les continents, le Groupe emploie 76 800 collaborateurs pour un chiffre d'affaires de 15,3 milliards d'euros en 2021, et occupe, seul ou en partenariat, des positions de premier plan mondial ou européen sur ses marchés. Safran s'engage dans des programmes de recherche et développement qui préservent les priorités environnementales de sa feuille de route d'innovation technologique.

Safran est classé 3ème meilleur employeur mondial dans son secteur par le magazine Forbes en 2021.

Safran Aerosystems est leader mondial des toboggans d'évacuation et des systèmes oxygène. La société est un acteur majeur dans les systèmes de sécurité et les systèmes de fluides pour les avions et les hélicoptères.

76 800
collaborateurs dans le monde
27
pays dans lesquels Safran est présent
35
familles de métiers
  • © Safran