注意 本网站不推荐使用internet explorer浏览器。请使用其他Web浏览器以获取更好的体验。

Repair Process Engineer

已发布
工业工程 Van Nuys , California , 美国本土外小岛屿 无固定期限合同 全职 本科文凭 3年以上
已发布

工作描述

The Repair Process Engineer is responsible for new repair capabilities technical development. Responsible for calibration program. Responsible for the review and maintenance of technical documentation through the shop. Leads the preparation of repair capabilities for Entry Into Service of new programs / products. Develops specific tools & test benches. Leads continuous improvement efforts.

DUTIES AND RESPONSIBILITIES

• New repair capabilities technical development – Duplication or entry into service
• Manages internal and external calibration by scheduling and performing necessary calibration of tools and gauges
• Review the technical documents (CMM, SB, SiL, FP) for new repair capabilities, entry into service of a new program, transfer of an OEM repair station to ZS network, regular updates
• Define and list specific tools, test benches and general facility installations to implement in the repair station (approved by CapEx). Follow up on the purchase of test and repair equipment and install them in the workshop. Record, approve and justify equivalences as required for new equipment.
• Design new specific tools and test benches if necessary, and coordinate with the OEM for review of design and approval of equivalency.
• Design and write internal repair instructions and coordinate with the OEM for approval. Focus on composite repairs: be an integral part of the inspection process, prepare disposition of the parts, review available repair documentation and prepare and approve additional technical documentation as required.
• Manage the training for technicians in coordination with the OEM
• Development of specific tools & test benches
• Continuous improvement (ergonomics, new specific tools…)
• Processes harmonization
• Prepare and release mechanical and/or electrical drawings to design new specific tools and/or test benches and/or fixtures in accordance with the OEM specifications to improve ergonomics and/or to reduce the time spent on some specific repair process

补充说明

Candidates for positions with SAU must be legally authorized to work in the United States. Employment eligibility verification will be required at the time of hire. Visa sponsorship is not available for this position. This description has been designed to indicate the general nature & level of work performed by an employee within this position. The actual duties, responsibilities & qualifications may vary based on assignment or group. All qualified applicants will receive consideration for employment without regard to race, color, age, ethnicity, religion, sex, sexual orientation, gender identify, national origin, disability, veteran status, genetic data or other legally protected status. SAU is committed to working with & providing reasonable accommodation to individuals with physical & mental disabilities. To verify the information in the job listing or if you need special assistance or an accommodation while seeking employment, please e-mail [email protected] We will make a determination on your request for reasonable accommodation on a case-by-case basis. SAU is an Equal Opportunity Employer Veterans/Disabled | Drug Free Workplace.

工作要求

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

a) Education
• Engineering degree (Bachelor of Science and above) from renowned University or College. Major in Manufacturing or Quality or Mechanical Engineering

b) Experience
• Three to five years of experience in MRO environment or test bench design or process improvement
• Experience with Oxygen systems, or pneumatic systems in a plus

c) Knowledge and Technical skills
• Ability to read, analyze, and interpret technical data (blue prints, drawings, bill of materials)
• Ability to design simple mechanical fixtures or specific tools for composite repairs or for the repair / disassembly / assembly of mechanical parts. Ability to produce corresponding drawings on computer-aided software for manufacturing.
• Ability to formalize repair and work processes, and write procedures for publication that conform to prescribed style and format.
• Ability to apply principles of logical or scientific thinking to a wide range of intellectual and practical problems.

d) Communication Skills
• Ability to read, analyze, and interpret technical data (blue prints, drawings, bill of materials)
• Ability to respond to common inquiries or complaints from customers, regulatory agencies, or members of the business community.
• Ability to formalize repair and work processes, and write procedures for publication that conform to prescribed style and format.
• Ability to effectively report present information to management, public groups, and/or top management.

e) Physical Demands
• The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
• Incumbent in this position must occasionally squat, crawl, climb, crouch, kneel, balance and push/pull and may be required to reach above shoulder level, must frequently bend/stoop. Must be able to occasionally lift up to 50 lbs
• Average visual acuity is required; must be able to use video display terminal, and color acuity is required. This job requires better than average manual dexterity; while performing the duties of this job, the employee is frequently required to sit; use hands to finger, handle, or feel; and talk or hear. Must be able to operate moving devises/tools and operate vehicles.
• Ability to travel as required – domestically and internationally.

logo safran

赛峰集团(Safran)是一家国际高科技集团公司,业务范围涵盖航空(推进、设备和内装)、防务和航天领域。其核心宗旨是致力于构建更安全且可持续发展的世界,让航空运输更加环保、舒适和便利。赛峰集团业务遍及全球,拥有76800名员工,2021年营业额为153亿欧元。单独或是通过合作,赛峰集团在其核心市场占据全球或地区领导地位。赛峰集团在其技术创新路线图中承诺将大力开展以环境为主导的研发项目。

赛峰集团在2021年被“福布斯”杂志评为该行业的全球第三最佳雇主。

赛峰航空系统公司(Safran Aerosystems)是撤离滑梯和氧气系统领域的全球领导者。公司是飞机和直升机用安全系统与流体系统的重要企业。

76,800
名员工
27
赛峰集团经营所在国家数量
35
职业类别
  • © Safran