Industrialization Engineer II

Location: Twinsburg, OH
Onsite 5 days per week

The Industrialization Engineer II is responsible for the design and deployment of the Safran Electrical and Power (SEP) products production lines; including Generator Control Units (GCUs), Transformer Rectifier Units (TRUs),and other electrical power conversion units. The Industrialization Engineer II assumes ownership of the design and technical transfer of the line's tools to Operations, qualifying them for use with the highest standards of safety, quality, and output. This includes, but is not limited to:
 Production setup of new products under development, both internally and within the supply base
 Support Manufacturing Engineering during initial production runs to validate development
 Provide inputs for concurrent engineering of Safran product within the supply base
 Support manufacturing and improvement activity
 Participate in design reviews to provide inputs form an industrialization standpoint

Essential Duties and Responsibilities
• The Industrialization Engineer II is required to monitor supplier compliance with the quality standards & flow downs, validates Production Parts Approval Process on delivered hardware and approves First Articles Inspections (FAIs) as part of managing the industrial validation and risk analysis activity for transfers and/or new products.
• The main function of the Industrialization Engineer II is to work with engineering, operations, and suppliers to optimize the design for manufacturability and cost.
• Create initial production work instructions for generators as well as electrical control and conversion units by utilizing available manufacturing processes and tools at hand. May design basic tooling and choose optimal assembly methods.
• Responsible for troubleshooting issues which affect production delivery schedules, customer satisfaction and quality.
• Provide industrialization support to the engineering department and the Supplier for process/product improvements.
• Serve as manufacturing representative on new development efforts to ensure design for manufacturability is taken into account within new programs
• Support assigned improvement programs, products, or transfers.
• May assist Supplier Quality on audits to confirm work instructions conform to drawing requirements.
• Adhere to safe work practices and contributes to the evolution of the health, safety, and environmental program and culture.
• Utilize Lean Manufacturing/One Safran principles and tools to set up efficient production process flows
• Travel requirement: (general guideline: 10% or less) locally, within the U.S., Outside the U.S.
• Evening/night hours may be required.
• Weekend hours may be required.

Qualifications
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Education and/or Experience
• BSME, BSEE, or Manufacturing / Industrialization or Engineering degree with experience in Aerospace manufacturing, or relevant practical experience
• A minimum of 3 years of design or manufacturing experience with aerospace products (electronics is a plus), or in related areas.
• Must be a United States citizen or possess the legal right to work in the U.S. on military and commercial applications.
Candidate skills & requirements
• Ability to learn and analyze manufacturing processes such as PCB testing, soldering, ESS, copper forming, brazing, impregnation.
• Ability to read and interpret engineering drawings and technical procedures, purchase specifications, applicable FAA regulations and contractual terms and conditions.
• Solid understanding of manufacturing processes and constraints inherent to the aerospace industry
• Basic knowledge with willingness to learn principles of Continuous Improvement (CI) activities
• Personality that supports hands-on troubleshooting with ability to follow and learn manufacturing processes
• Exceptional interpersonal skills with the ability to communicate verbally and in writing at all levels internally and externally, representing Safran to the suppliers
• High level of self-motivation and job planning, able to work independently and meet deadlines
• Enthusiastic, with a drive for results
• New Product Development & Launch: Basic knowledge of the product life cycle
• Product development and launch system - i.e. APQP, PPAP, etc - and has basic knowledge of the associated tools such as PFMEA, Control Plans, Characteristic Matrix, Gage Capability, Process Capability, and Process Flow.
• Ability to learn and use tools for Preventive Maintenance, Machine Runoff, Risk analysis, Causal analysis, 8D, SPC etc
Certificates, Licenses, Registrations
• None

Preferred Skills :
• Experience with the aerospace manufacturing environments and standards\

Physical Demands
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
• May regularly require to stand, walk sit, lift, use hands and fingers, handle and feel, reach with hands and arms and observe various instruments.
• May require long periods of sitting
• Ability to lift up to 40 pounds
• May require prolonged repetitive use of upper extremities.

赛峰集团（Safran）是一家国际高科技集团公司，业务范围涵盖航空（推进、设备和内装）、防务和航天领域。其核心宗旨是致力于构建更安全且可持续发展的世界，让航空运输更加环保、舒适和便利。赛峰集团业务遍及全球，拥有100000名员工，2024年营业额为273亿欧元。单独或是通过合作，赛峰集团在其核心市场占据全球或地区领导地位。赛峰集团在其技术创新路线图中承诺将大力开展以环境为主导的研发项目。
赛峰集团（Safran）作为航空与防务领域的佼佼者，是行业中入选《时代》杂志“2024年度全球最佳公司”（World's Best Companies 2024）榜单的首家公司。

赛峰电气与电源公司（Safran Electrical & Power）是航空电气系统的世界领袖之一，同时亦是设备电气化以及电动与混合动力推进领域的重要参与者。其员工人数达14,000人，业务遍及13个国家/地区。