注意 本网站不推荐使用internet explorer浏览器。请使用其他Web浏览器以获取更好的体验。

Dynamic FEA Engineer II

已发布
赛峰航空座椅公司 系统工程 Gainesville , Texas , 美国 无固定期限合同 全职 本科文凭 8年以上
已发布

工作描述

Occupational Summary:

The individual is responsible for performing static and quasi-static analysis independently starting from component to sub-structure level including dynamic analysis.

Duties and Responsibilities (essential functions):

A) Responsible for inspecting the CAD data received from designers prior to the inception of meshing.
B) Independently meshing the components using Altair tools and responsible for the quality checks defined per internal design validation guidelines for meshing at Safran Seats USA
C) Will set up the model for static, quasi static and impact simulation for 16 and 14G loading conditions using Altair tools and/or LS-Prepost .
D) Analyze the test data to implement proper engineering approach into the FE model for further improvements.
E) Implement analytical approach and establish correlation with actual test data.
F) Perform FEA on detail parts and assemblies to verify compliance with structural and occupant injury criteria.
G) Perform necessary linear/non-linear static analysis and dynamic simulation.
H) Perform Pre and Post processing.
I) Validate model and establish correlation.
J) Comply with Safran Seats USA procedures (QAP) and certification internal procedures.
K) Document all design validation work and maintain database.
L) Ensures quality of model, analysis and on time completion.
M) Provides status and schedule updates to department head and other appropriate entities on a regular basis.
N) Performs other duties as assigned.

补充说明

Competencies: Acts in accordance with company values and related competencies.

Communication Skills: Must have the ability to generate written communication and to operate required office equipment. Ability to read and review written communication. Speech and hearing abilities that allow individual to communicate clearly and distinctly in English.

Reasoning Ability: Ability to solve problems and think strategically.

Physical Demands: This position requires extended periods of sitting while working with computers and viewing computer monitors and other office equipment. Finger dexterity needed in using misc. office equipment such as telephone, computer and copy machine, etc. Bending, stooping, reaching, and lifting up to approximately twenty pounds are required during tasks related to the job.

工作要求

Qualification Requirements:

Knowledge and Skills:

i) Must have a strong background in basic structural engineering such as free body diagrams and strength of materials.
ii) Must have broad understanding of finite element analysis and fatigue methods.
iii) Must have FEA experience using LS-Dyna or Radioss. In addition, must have experience using Altair HyperWorks suite or ANSYS. Experience with NASTRAN or ABAQUS is preferred.
iv) Knowledge of stochastic/statistical tools (DOE) and Optimization tools is preferred.
v) Knowledge of composites is preferred.
vi) Knowledge of seat belt modeling is required
vii) Must be well-versed in understand the kinematic of hybrid II/III dummy model.
viii) Knowledge of topology along with weight and shape optimization using Opti-Struct is preferred.
ix) Must have strong mechanical aptitude.
x) Must be detail oriented and have sound engineering judgment.
xi) Must be self-motivated and a self-starter.
xii) Must be able to communicate efficiently in writing and verbally.
xiii) Must be able to operate standard office equipment.
xiv) Must be able to generate technical reports.
xv) Must be willing to perform tests and some physical work at the test laboratory, as required.
xvi) Basic ProE/CATIA skill is preferred.
xvii) Familiarity with FAA regulations, Boeing/Airbus specifications is preferred.


Education and Experience:

Must have a Master's degree in Mechanical Engineering, Aerospace Engineering, or Aeronautical Engineering or related. Requires 2 years of Finite Element Analysis related experience using LS-Dyna or Radioss. In addition, must have experience using Altair HyperWorks suite or ANSYS. Prefer experience with NASTRAN or ABAQUS.

OR

Must have a Bachelor's degree in Mechanical Engineering, Aerospace Engineering, or Aeronautical Engineering or related. Requires 3 years of Finite Element Analysis related experience using LS-Dyna or Radioss. In addition, must have experience using Altair HyperWorks suite or ANSYS. Prefer experience with NASTRAN or ABAQUS.

工作的特殊性

Less than one week of total traveling per year; international and domestic

确定您未来的工作地点

2000 Weber Dr TX 76240

Gainesville

Texas 美国

复制地址
76,800
名员工
27
赛峰集团经营所在国家数量
35
职业类别
  • © Safran